Customer Happiness Team (+603) 6156 2252 Mon-Fri 09:00 to 18:00 or E-mail: malaysia@toolsdepotgroup.com






BRANDS

TM
TM Induction Heating


CATEGORIES


TM induction heating has manufactured induction heaters for more than 25 years. Through continuous innovation and extensive experience, TM is able to offer technically advance and reliable induction heaters for heating up bearings, bushings, gears, pulleys and couplings.


The Pioneer in the use of induction applications

Advantages of TM Easy therm induction heaters:

  • Fast controllable heating process.
  • Safe heating process; only the work piece is heated.
  • Elimination of hot oil bath, no risk of localized overheating.
  • Suitable for sealed and shielded bearings.
  • Suitable for pre-greased bearings.
  • Suitable for bearings with polyamide cages.


Technical advantages of TM Easy therm induction heaters:

  • Manufactured and tested according to the CE, UL and GS regulations.
  • Intelligent programmable electronic unit:
    • Possible to set time and temperature to heat up big parts uniform;
    • Safe: count down before the heater start, or IR remote control;
    • Temperature control accuracy +/- 2°C;
    • Timer accuracy 0,01 sec;
    • Power can be set manual from 0-100%.

  • Fast heating process through high output; Cos phi > 0,8.
  • "TURBO-BOOST" : In the horizontal position the parts will heat up twice as fast.
  • The heating coil is placed horizontal under the part:
    • By this it is impossible to damage the coil;
    • This ensures an equal temperature all over the part (inner- and outer ring);
    • This makes it able to heat up parts with smaller bores.

  • All heaters are continuously useable without any optional cooling system.
  • Constantly monitoring heating process by probe and microprocessor.
  • Temperature control accuracy +/- 2°C.
  • Timer accuracy 0,01 sec.
  • Maintenance free.
  • Three years warranty.
  • Easy to use; user friendly design.
  • Ergonomic design (pivoting yoke principle).
  • Automatic power regulation, no manual pre-setting necessary.
  • Less than 2A/cm residual magnetism.


The pivoting yoke has the great advantage that only the work piece is handled, because the arm does not have to be lifted manually. This avoids unnecessary handling and reduces the risk of dirt intruding into the bearing or work piece. Measurements heaters and parts: E



BACK